~CAP 231ex/232 - 77 inch Wingspan Laser-Cut Short-Kit RC Aircraft 25-45cc Engine

Description

CAP 231ex /232 - 77" Span Short-Kit
.
RC Aircraft 25-45 cc
Cap 231ex/232
-
Laser-Cut Short-Kit
.
Specifications
:
Wingspan:  77 inches (195.5cm)
Overall length:  70.5 inches (179cm)
Wing area:  1102
square inches
Flying weight:  13 to 14 pounds
Recommended engines:
25–45cc
;
2- or 4-cycle
Radios:  4 channel with 5 - 6 servos
>
TRUSTED EBAY SELLER SINCE 2003
>
I
tem Ships WORLDWIDE
******************************************************************************************************
This
1994-2005 sport-scale model is scaled at 1/3.80  (26.35%) of the aircraft. It can be built as the 231ex or 232 variant. Model is incredibly acrobatic, smooth in handling, and extremely maneuverable. RC Model is suitable for sport flying, Sport-Scale,
I
MAC Scale Aerobatics, or
I
MAA /QSAA
. Symmetrical airfoils are used throughout model to provide a fully aerobatic envelope. Design utilizes a midship fuel tank location, pull-pull cable rudder, removable tail assembly,
and a span-wise variable airfoil design for excellent low-speed handling characteristics.
Photos 1- 6
-
show a completed model
WITH
finish applied.
.
Construction materials are balsa, plywood, and spruce. Model comes in at a weight of 13 to 14
pounds
ready-to-fly. Kit comes with full-sized
,
digitally-printed plans
,
along with helpful building notes that detail all steps needed to complete your successful model.
Plans consist of 3 digitally-printed sheets, and are accompanied by building notes with 44 black
&
white copied photos of various construction details. Laser-cut short-kit contains balsa and plywood parts needed for model completion
;
with laser-cut parts masterfully produced by a popular wood-model manufacturer.
Kit features a fiberglass cowl
&
wheel pants, aluminum landing gear,
and a molded canopy.
This precision-engineered model is a builder's kit, in that you will have a
terrific
opportunity to build and customize all completed structural details to your satisfaction.
Fiberglass parts are shipped separately from the manufacturer, Fiberglass Specialties, to you
,
in a 2nd package. We contact the company with your order to ensure these parts are shipped to you.
Additional wood material list is supplied with plans. Along with our list of laser-cut parts provided in kit, is an additional listing of  hardware required to complete model. You need to purchase this hardware separately from our eBay store (D & L DESIGNS RC AIRCRAFT), or from your nearby hobby store.
We can supply you with this needed hardware at an additional cost
.
Email us, as these RC parts are NOT currently listed on our store
. We would email the extra fee needed.
Examples of additional hardware needed are:
bellcrank
cable rudder exit guides
cable
cable rudder horn
elevator horns
aileron horns
tail wheel assembly
Digitally-Printed
Plans
for this model are also available separately for an extra cost, which includes shipping for the USA ONLY. International buyers need to email us for model plan's costs to their region.
The laser-cut wood pack, cowl & wheel pants, aluminum landing gear,
along with the canopy, are also available for purchase separately. Email us for costs and shipping charges to your destination.
~~~~~~~~~~~~~~~
Laser-Cut
,
Short-Kit  Description
A laser-cut, short-kit contains only the basic building parts of a model aircraft. These parts are the hardest-to-make items in a kit, due to the unique shapes needed for providing the accuracy needed for a well-made model. RC modelers want the very best, precisely-cut parts for crafting their special airplane. They select "laser-cut" kit parts for the precision they provide for basic model structural components.
ALL the Short-Kit Models in our store contain All of the Following Parts, and are Also Included with yhis Particular Model
.
Typical parts in a model short-kit consist of balsa and plywood wing ribs,  plywood root plates. The plywood fuselage parts consist of firewall, motor mount box, fuselage formers, wing pin alignment plates, cable rudder platform, landing gear plate, tail wheel plate, fuselage doublers, and instrument panel plate. Fuselage balsa parts include top deck formers, turtle deck formers, and some kits have some of the tail parts pre-cut.
Additional materials you need to purchase are balsa, plywood, spruce, and possibly pine or basswood. The remainder of the model is made from balsa-wood sheets that are cut to shape by the builder. Also, some pieces may need to be cut to size by the modeler from a plywood sheet. Builder also needs to cut spruce wing spars, and spruce fuselage longerons.
With your purchased laser-cut, short-kit ALL accessories listed below are included
.
Typical accessories for a model usually consist of plastic canopy, pre-shaped aluminum landing gear, epoxy glass cowl & wheel pants. However, these accessories or
additional hardware
can also be ordered separately from our eBay store if needed (D & L DESIGNS RC AIRCRAFT), or from your nearby hobby store.
We can supply you with these items at an additional cost if you email us, as these RC parts are NOT currently listed on our store. We could provide you this extra fee.
Model plans are also available separately for an extra fee, which includes shipping for the USA ONLY. International buyers need to email contact us for model plan's costs
and shipping charges to your destination.
Additional hardware needed are: pilot figure, spinner, motor mount, fuel tank, nuts & bolts, wheels, tail wheel bracket, aileron horns, cable rudder horn, strip aileron linkage, pushrods, hinges, clevises, nylon landing gear bolts, cable rudder bellcrank, cable rudder exit guides, cable, cable rudder horn, elevator horns, and engine.
>>
Due to the size of the kit boxes (2), you must email contact D & L DESIGNS for shipping costs to your USA or international destinations. We then calculate the best rate to your region. Kit is shipped using USPS Ground (Parcel Select service) for USA orders to provide the lowest rate. A 2nd package of fiberglass cowl
&
wheel pants is shipped by manufacturer using USPS carrier service. Postage fee of
approx.
on 2nd box is included with kit purchase for USA shipping only!
For international orders, USPS Priority International is used but the 2nd box containing the fiberglass parts requires extra mailing fees to be paid by you.
>>
Return for this item is within 30 Days.
****************************
******************************
Made in USA
PayPal Verified
Pay securely with a major credit card through PayPal
Our eBay store has
BOTH PayPal and ID Verified Approval,
providing buyer confidenc
e
.
Items come from a smoke-free business. Only RC Aircraft items have a return or exchange policy. All other items sold AS IS: books, teaching resources, posters, & collectibles, etc
.
We ship after payment is received
, &
funds have cleared in 1-4 days
.
~ Please e-mail with questions before BIDDING or BUYING.
~ We want to make sure you are satisfied with your purchase.
>>We've been proudly serving customers for 25+ years
~~S
ince we are not responsible for packages lost or damaged by USPS or other delivery services, shipping insurance may be considered for collectibles or more costly items.
We Do Not Charge Any Extra Handling Fees
for our service to you
.
We will combine orders whenever possible to reduce your total shipping charges. Email us to request this combined cost.