Happymodel Larva X 2-3S 2.5-inch FPV Drone Aircraft Built-in Receiver

Description

Acasis High Speed 13 Ports USB3.0 HUB USB Splitter with 12V 6A Power Supply Cord
59.79 USD
64.99 USD
Free shipping
8%
off
ShenStar 5328S Propellers 3-Blade PC Props for for DJI FPV Drone Accessories
4.59 USD
4.99 USD
2.0 USD
8%
off
JMT DIY Set Kit J145 145mm Wheelbase RC FPV Drone F405 OSD 2-3S 1200TVL Camera
159.19 USD
173.03 USD
Free shipping
8%
off
XT-XINTE M.2 To PCIE Riser X16 Adapter 4-Disk Expansion Card for NVME M Key SSD
93.98 USD
102.15 USD
Free shipping
8%
off
Flycolor Raptor SLIM 40A BLHeli-S ESC 3in1 Driver IC Support Dshot150 300 600
19.04 USD
20.7 USD
Free shipping
8%
off
XT-XINTE M.2 to Minipcie Transfer Cable A/E Interface for Ngff M2 Adapter Cable
25.36 USD
27.57 USD
Free shipping
8%
off
Happymodel Larva X 2-3S 2.5-inch FPV Drone Aircraft Built-in Receiver Frsky D8 SPI/Flysky SPI/DSMX/Frsky RXSR/TBS Crossfire
Note: the color props is sent at random, black is sent by default, but sometime is red.
Specifications:
Brand Name: Happymodel
Item Name: Larva X 2-3S 2.5inch Brushless FPV drone
Wheelbase: 100mm
Size: 88mm*88mm*45mm(without propellers)
Weight: 50g(without battery)
Recommended Battery:
3S 300mah/350mah  2S 450mah
Features:
New Crazybee F4 PRO V3.0 AIO Flight controller 2-4s Lipo Compatible
Powerful and smoothly
Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles
Camera Angle adjustable
VTX power switchable 25mw~200mw
Smartaudio ready , change VTX bands, powers, channels via OSD
Receiver option : Frsky D8 ,Flysky , Specktrum ,Frsky RXSR ,TBS CRSF
Diamond VTX Ready
Compatible both for 2s-3s Lipo/LIHV
Package includes:
Item Name Qty
Larva X frame 1
Receiver Option1: Crazybee F4FR V3.0 PRO FC built-in Frsky D8 NON-EU RX 1
Receiver Option2: Crazybee F4FS V3.0 PRO FC built-in Flysky RX
Receiver Option3: Crazybee F4FS V3.0 PRO FC with DSM2/DSMX RX
Receiver Option4: Crazybee F4 V3.0 with external Frsky RXSR receiver
Receiver Option5: Crazybee F4 V3.0 with external TBS Crossfire Nano RX
1103 KV7000 motor 4
Micro Avan rush propeller 2.5inch(4cw+4ccw)   1
Camera : Runcam Nano2  1
VTX: 5.8g 25mw~200mw switchable with 720p DVR (Diamond_vtx)
Propeller disassemble tool 1
Screwdriver 1
Spare parts specifications:
Motor
Mode: EX1103
KV options: KV7000
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:3mm
Shaft Diameter: Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*16mm
Weight(g):3.7g
Flight controller
(Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
(Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
(No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 2-4S battery input (DC 7-17V)
Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready
Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)
No RX version need to add external Receiver
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 70A
Current meter scale set to 470
Built-in 5V 1A BEC
Built-in voltage detection
Onboard 4in1 ESC
MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Current: 10A continuous peak 12A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_5.HEX
Default protocol: DSHOT600
Internal Frsky NON-EU receiver Version
SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Internal Flysky receiver Version
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Failsafe support
External TBS Crossfire version
CRSF Protocol , Official TBS transmitter compatible
External DSMX version
Frequency range: 2.403-2.479Ghz
Input power: 3.3V -- 5V
Response time: 22ms / 11ms
Resolution: 1024/2048
Display method: LED
Operating voltage: 3.3V
Working current: 60MA
Size: 18mm*13mm*5mm
Weight: 0.9 g
Antenna length: 30mm
Data format: Serial port
Protocol: DSM2/DSMX
Distance: no ground interference (1 m from the ground ) > 300m
External Frsky RXSR version
Weight: 1.5g
Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)
Operating Voltage Range: 3.5V~10V
Operating Current:70mA@5V
Firmware Upgradable
Compatibility: FrSky X Series modules and radios in D16 mode
Could support Frsky New ACCST Protocol ( Upgrade firmware)
Diamond_VTX
Output power: 25~200mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 250mA~510mA(type)
Antenna: RG178 antenna
U.FL interface
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smartaudio ready
Weight: 3g without antenna
Video Output Size: VGA (640x480)
Video Output format: NTSC
Record video size : 1280x720 @25FPS
TF Card support: Max.32G
Interface: JST SH1.0 3pin for Camera
JST SH1.0 5pin for Connect with F3/F4 Flight controller
Compress Format: AVI
Runcam NANO2
Model: Nano 2
Image Sensor: 1/3" CMOS
Horizontal Resolution: 700TVL
Lens: 2.1mm(M8) FOV 155°
Signal System: NTSC / PAL
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: [email protected]
D-WDR: Auto
Day/Night: Color
Power: DC 3-5.5V
Current : 110mA@5V [email protected]
Housing Material: ABS
Net Weight: 3.2g
Dimensions: L14mm*W14mm*H16mm