Airbrush Mini Sandblaster Etch Etching Glass Etcher, Air Abrasive Sprayer Eraser

Description

TCP Global Ebay Storefront
Ordering
|
Shipping
|
Returns
|
International
Product Information
Part# MAS G78
Gravity Feed Air Abrasive Eraser and Etching Airbrush Kit - Mini Sandblaster Etcher Gun with 1/2 oz. Cup, 0.5 mm Tip, Hose
Master performance Model G78 multi-purpose high performance air abrasive etcher and etching airbrush gun kit with a 1/2 oz. gravity abrasive material cup and a 0.5mm tip head.
Kit also includes a 6" braided air hose with a mini-inline moisture filter, a jar of aluminum oxide abrasive 5 oz. (150g) net weight, a dust mask and an airbrush hanger.
It operates like a mini sandblaster, as it's ideal for applications where cleaning, etching or removing surface material is necessary. The spray etch pattern is from pencil line up to 1/4". Up to 240 grit abrasive media can be used.
Common hobbyist and manufacturer applications - Etching designs in glass, removing rust and paint, erasing color errors, weathering models and rail-cars, antiquing furniture, cutting monograms, cleaning jewelry and fine parts.
100% Satisfaction Guarantee: Buy with confidence, if you're not satisfied with this airbrush at anytime within the first year of purchase, we'll provide a refund or replacement.
Master Professional Single-Action Gravity Feed Air Abrasive Etching Airbrush Gun with a 1/2 oz. Cup and a 0.5 mm Tip
Operates like a mini sand-blaster!
Great for etching glass designs, stripping paint, weathering railcars and antiquing furniture.
Set Includes:
Master model G78 gravity feed abrasive etching airbrush with a 0.5 mm tip and a 1/2 oz. cup
6" Braided air hose with mini-inline moisture filter
Jar of aluminum oxide abrasive 5.3 oz. (150g)
One dust mask; Airbrush hanger
Instruction guide and molded plastic storage case
Common Applications:
The air abrasive & etching airbrush gun is a versatile instrument that can erase color errors and act as an etching tool.
Used by hobbyists and manufacturers to clean jewelry and fine parts, remove discoloration, rust, corrosion, etch glass, or cut monograms.
Issued by lithographers to highlight half tones and erase defects without marring the surface or leaving a smudge.
Used extensively by model railroaders for weathering railcars & accessories.
Operation:
For general erasing, clean dry air at pressures of 30 to 45 PSI may be used. To be sure of satisfactory performance a Moisture Trap or Regulator with Moisture Trap should be used to remove, within their rated capacity, water oil and other impurities from your source of air supply. Air compressors with a air supply tank are recommended. Expect a slight trickle of abrasive to flow out after the button has released. This is caused by air pressure in the cup being relieved. Warning: Maximum air pressure 65 psi.
Attach air hose coupling to valve casing
Unscrew cover
Fill cup 3/4 full with clean dry sand, tighten cover securely
To prevent leaks, do not get any abrasive on the cup threads
Regulate air pressure for erasing on paper surfaces to approximately 30 PSI. Use a higher air pressure of 45 to 65 PSI for metal, gold castings, plastic or glass work
Hold the Model G78 the way you would a pencil. Move the Model G78 with the Tip about 1/8Ó to 1/2Ó above the work surface. Adjust to achieve results desired
Adjust Control Screw to the lowest point to avoid excessive use of abrasive
For work requiring fast, heavy abrasive cutting, use Fast Cutting Abrasive and high air pressure. Hold tip of the Model G78 very close to the working surface to cut faster. Hold at a distance for blending and broad coverage.
View all categories
Warehouse Locations
San Diego, California
South Carolina