-40%
1pc CP-3515 Desoldering Braid Copper BGA Desolder Remover Wick Wire Roll 1.5m *
1pc CP-3515 Desoldering Braid Copper BGA Desolder Remover Wick Wire Roll 1.5m *
1pc CP-3515 Desoldering Braid Copper BGA Desolder Remover Wick Wire Roll 1.5m *
1pc CP-3515 Desoldering Braid Copper BGA Desolder Remover Wick Wire Roll 1.5m *
1pc CP-3515 Desoldering Braid Copper BGA Desolder Remover Wick Wire Roll 1.5m *
1pc CP-3515 Desoldering Braid Copper BGA Desolder Remover Wick Wire Roll 1.5m *

1pc CP-3515 Desoldering Braid Copper BGA Desolder Remover Wick Wire Roll 1.5m *

$ 2.14

Availability: 100 in stock
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer
  • Brand: katvtymwbto
  • Condition: New
  • MPN: pxeqmxtawth
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted

    Description

    HW0001707
    Specification:
    Brand new
    Material: Copper
    Color: as shown in picture
    Length: approx. 1.5m
    Width: approx. 3.5mm
    Using refined from pure copper and special chemicals.
    Anti-corrosion, good thermal conductivity.
    Used in absorbing excess solder.
    The tin effect is very good, absorb and clean.
    Easy to use.
    How to Use:
    1.Place the desoldering wick over the solder to be removed.then push the heated soldering iron tip onto the desoldering wick,The solder will be absorbed
    2. Remove the desoldering wick after the solder has been absorbed
    3. Cut off the used section of the wick using nippers
    4. Repeat steps1,2 and 3 if the solder is not removed completely.Absorbability may differ depending on the type of solder.Sn63% and 60% (tin content) have good absorbability.
    P
    ackage included:
    1 x CP-3515 Desoldering Braid
    Note:
    Please allow 1-5cm errors due to manual measurement.
    Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
    Listing and template services provided by inkFrog